Enhanced Mechanical Properties and Microstructure of TiC Reinforced Stellite 6 Metal Matrix Composites (mmcs) Via Laser Cladding Additive Manufacturing
JOURNAL OF ALLOYS AND COMPOUNDS（2025）
Indian Inst Technol Kanpur
Abstract
In the present study, Stellite 6 (Co-Cr-W-C group of superalloy) and Stellite 6-TiC MMCs have been successfully fabricated by process optimization via laser cladding additive manufacturing. Addition of TiC particles resulted in significant grain refinement of the matrix and generation of strains in the vicinity of the particle-matrix interface, which contributed to the indirect strengthening of the composite. Moreover, the columnar to equiaxed transition (CET) of the Stellite 6 grains was also noticed as TiC particles provided numerous heterogeneous nucleation sites ahead of advancing columnar grains of Stellite 6, which were confirmed by utilizing scanning electron microscopy (SEM) and electron back-scattered diffraction (EBSD) techniques. Transmission electron microscopy (TEM) study revealed the formation of secondary carbides of Ti, Cr, and W at the TiC particle-matrix interface, resulting in strong interfacial bonding. Incorporation of 10 vol%, 20 vol% and 30 vol% TiC particles enhanced the hardness of the composites by similar to 26.7 %, similar to 33.3 %, and similar to 44.2 %, respectively. This was further corroborated with improvement in the wear resistance of composites. Stellite 6 with 10 vol% TiC composite exhibited superior sliding wear performance compared to 20 vol% and 30 vol% composites at room temperature. The shift of two-body abrasive wear in 10 vol% TiC composites to three-body abrasive wear in 20 vol% and 30 vol% composites was observed.
MoreTranslated text
Key words
Laser cladding additive manufacturing,Stellite 6,Titanium carbide,MMCs,EBSD,Hardness
求助PDF
上传PDF
View via Publisher
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
- Pretraining has recently greatly promoted the development of natural language processing (NLP)
- We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
- We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
- The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
- Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper
Summary is being generated by the instructions you defined