Experimental and Numerical Investigation on Effect of Butanol Isomers Additions in Iso-Octane Sooting Transition Chemistry
EXPERIMENTAL THERMAL AND FLUID SCIENCE（2025）
China Jiliang Univ
Abstract
The effects of four butanol isomers additions on sooting transition process were studied in iso-octane counterflow diffusion flame combining flame luminosity characteristics and gas-phase combustion chemistry. Flame luminosity characteristics was obtained to determine the sooting transition points of all investigated flames with homemade image processing and transition point extraction methods. The results indicated that the delay effect has occurred on sooting transition point in four blended flames with a little difference. Gas-phase combustion chemistry of the different flames in sooting transition process was studied experimentally by an online GC system as well as numerically by kinetic analysis realized with two distinct kinetic mechanisms. In addition, soot formation characteristics have also been qualitatively analyzed with soot model. Experiments and simulations show that, depending on the butanol isomer, the intermediate species production is clearly different. These different species pools play an important role on soot formation pathways as demonstrated by the simulations. Although nbutanol and sec-butanol were weaker in benzene formation, stronger C2H2 production capacity was dominant in PAHs growth. Tert-butanol had the highest C6H6 concentration with a ratio of 7 %-15 % higher than the other isomers due to the strongest IC4H8 production capacity. Therefore, its flame also has the highest PAHs concentration. Both effect mechanisms existed in iso-butanol blended flame.
MoreTranslated text
Key words
Sooting transition,Optical diagnostics,Soot precursors,Butanol isomers,Flame chemistry
求助PDF
上传PDF
View via Publisher
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
- Pretraining has recently greatly promoted the development of natural language processing (NLP)
- We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
- We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
- The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
- Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper
Summary is being generated by the instructions you defined