The Influence of Oxidative Aging and Wax Structure on Bitumen Physical Hardening: Insights from Model Wax Compounds
CONSTRUCTION AND BUILDING MATERIALS（2024）
Southwest Jiaotong Univ
Abstract
Physical hardening (PH) significantly affects bitumen's low-temperature performance. This paper investigates the effect of oxidative aging and wax structure on PH using 4-mm dynamic shear rheometer (4-mm DSR) and differential scanning calorimetry (DSC) tests. The results show that the wax chain length has a pronounced effect on the PH. Short-chain waxes, such as C18 and C24 affect the PH while longer-chain n-paraffins like C40 or Sasobit have almost no effect. In addition, the physical hardening index (PHI) is not linearly increasing with wax content but shows a maximum at a particular wax percentage. Wax-doped samples that crystallize before reaching the hardening temperatures typically show a reduced PHI compared to those with crystallization temperatures just below the hardening temperature. When crystallization and melting temperatures are not close to the hardening temperatures, the PHIs are typically reduced. Oxidative aging also influenced the PHI and in most cases the hardening decreased after aging. The highest PHI of almost all investigated samples occurs at 0 degrees C among the four typical temperatures. This investigation provides insights in the mechanism of PH and in the relations between wax contents, the hardening temperature, and the PHI. It also shows that while long-chain waxes used as warm mix additives, will not cause a PH risk, short-chain waxes present in pyrolyzed waste plastic, for example, should be handled with care. In addition, PH is also crucial for the intermediate service temperatures and not exclusively for thermal cracking at low temperatures.
MoreTranslated text
Key words
Bitumen,Wax compounds,Physical hardening,Oxidative aging,Thermal behaviors
上传PDF
View via Publisher
AI Read Science
AI Summary
AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
Example
Background
Key content
Introduction
Methods
Results
Related work
Fund
Key content
- Pretraining has recently greatly promoted the development of natural language processing (NLP)
- We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
- We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
- The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
- Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
Upload PDF to Generate Summary
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Data Disclaimer
The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
Chat Paper
Summary is being generated by the instructions you defined