WeChat Mini Program
Old Version Features

    • Effects of Bi2O3–CuO Additives on Microstructure and Microwave Properties of Low-Temperature-sintered NiCuZn Ferrite Ceramics

    Tiantian Zeng,Lijun Jia,Zhihao Chen, Mingchao Yang, Rui Luo

    CERAMICS INTERNATIONAL（2024）

    Univ Elect Sci & Technol China

    Cited 6|Views8
    Abstract
    In this study, (Ni0.2Cu0.2Zn0.6O)(1.03)(Fe2O3)(0.97) ferrite ceramics with low microwave loss were synthesized through low-temperature sintering and doped with low eutectic mixture Bi2O3-CuO. Additionally, the influence of Bi2O3-CuO doping amount on phase composition, microstructure, and microwave performance of NiCuZn ferrite ceramics was systematically explored. It was found that all samples exhibited pure spinel phase. Moreover, scanning electron microscopy analysis revealed that appropriate doping amount of the Bi2O3-CuO mixture promoted grain growth and densification, leading to dense dual microstructure in NiCuZn ferrite ceramics. Notably, this microstructure significantly enhanced microwave properties of the material. For Bi2O3-CuO doping amount of 0.5 wt % and at sintering temperature of 910 degree celsius, the NiCuZn ferrite ceramics exhibited low ferromagnetic resonance linewidth (dH approximate to 90 Oe), minimal dielectric loss (tan delta(epsilon) approximate to 2.73 x 10(-4)) at 9.3 GHz, and high saturation magnetization (4 pi Ms approximate to 3644 Gauss). These results highlight the potential of Bi2O3-CuO as promising sintering aid, which could support the application of NiCuZn ferrite ceramics to microwave devices.
    More
    Translated text
    Key words
    NiCuZn ferrite ceramics,Low-temperature sintering,Microstructure,Microwave properties
    求助PDF
    上传PDF
    View via Publisher
    Bibtex
    AI Read Science
    AI Summary
    AI Summary is the key point extracted automatically understanding the full text of the paper, including the background, methods, results, conclusions, icons and other key content, so that you can get the outline of the paper at a glance.
    Example
    Background
    Key content
    Introduction
    Methods
    Results
    Related work
    Fund
    Key content
    • Pretraining has recently greatly promoted the development of natural language processing (NLP)
    • We show that M6 outperforms the baselines in multimodal downstream tasks, and the large M6 with 10 parameters can reach a better performance
    • We propose a method called M6 that is able to process information of multiple modalities and perform both single-modal and cross-modal understanding and generation
    • The model is scaled to large model with 10 billion parameters with sophisticated deployment, and the 10 -parameter M6-large is the largest pretrained model in Chinese
    • Experimental results show that our proposed M6 outperforms the baseline in a number of downstream tasks concerning both single modality and multiple modalities We will continue the pretraining of extremely large models by increasing data to explore the limit of its performance
    Upload PDF to Generate Summary
    Must-Reading Tree
    Example
    Generate MRT to find the research sequence of this paper
    Data Disclaimer
    The page data are from open Internet sources, cooperative publishers and automatic analysis results through AI technology. We do not make any commitments and guarantees for the validity, accuracy, correctness, reliability, completeness and timeliness of the page data. If you have any questions, please contact us by email: report@aminer.cn
    Chat Paper
    Summary is being generated by the instructions you defined