Effect of Residual Extractable Lignin on Acetone-Butanol-Ethanol Production in SHF and SSF Processes

Background Lignin played an important role in biochemical conversion of biomass to biofuels. A significant amount of lignin is precipitated on the surface of pretreated substrates after organosolv pretreatment. The effect of this residual lignin on enzymatic hydrolysis has been well understood, however, their effect on subsequent ABE fermentation is still unknown. Results To determine the effect of residual extractable lignin on Acetone-Butanol-Ethanol (ABE) fermentation in separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) processes, we compared ABE production from ethanol washed and unwashed substrates. The ethanol organosolv pretreated loblolly pine (OPLP) was used as the substrate. It was observed that butanol production from OPLP-UW (unwashed) and OPLP-W(washed) reached 8.16 and 1.69 g/L, respectively in SHF. The results showed that ABE production in SHF from OPLP-UW prevents an “acid crash” as comparing the OPLP-W. In SSF process, the “acid crash” occurred for both OPLP-W and OPLP-UW. The inhibitory extractable lignin intensified the “acid crash” for OPLP-UW and resulted in less ABE production than OPLP-W. The addition of detoxified prehydrolysates in SSF processes shortened the fermentation time and could potentially prevent the “acid crash”. Conclusions The results suggested that the residual extractable lignin in high sugar concentration could help ABE production by lowering the metabolic rate and preventing “acid crash” in SHF processes. However, it became unfavorable in SSF due to its inhibition of both enzymatic hydrolysis and ABE fermentation with low initial sugar concentration. It is essential to remove extractable lignin of substrates for ABE production in SSF processes. Also, a higher initial sugar concentration is needed to prevent the “acid crash” in SSF processes.